Surbuf HHR Series 3″ X 5″ / 4 Pack Surbuf with MicroFingers technology helps take the work out of staining, waxing, polishing and buffing hard surfaces. Surbuf HHR Series 3″ X 5″ hand-held multifunctional applicator & buffing pads featuring MicroFingers technology. These pads use the same MicroFingers technology as our machine pads for efficient product application & cleaning. For woodworking, use this product to apply finishing products such as oils, stains, polyurethane, and other finishing products. For automotive and marine, use to apply tire dressings and cleaning and preservatives to upholstery. For around the home this product is excellent for cleaning dishes, pots, windows, window screens and many other cleaning needs. Pads are sold four per package. Key Benefits of Surbuf Pads with MicroFingers

1. MicroFingers resist bending and matting to allow cooler, non-burning surface temperatures, which helps protect clear coat finishes.
2. Slim profile easily conforms to different surface contours for maximum coverage and efficiency.
3. Surbuf pads allow for a wide range of operating speeds up to 12,000 opm on ANY solid surface without snagging while reducing the risk of damage to pin striping, decals, and wood tear-out. It also minimizes friction, skipping, and chattering.
4. Hook-and-loop fastening system makes changing pads quick and easy.
5. Edge-to-edge loop fastening accepts various sizes of backing plates providing full hook-to-loop engagement for maximum holding strength and added peripheral edge stability.
6. Low-pad absorption helps make cleaning and polishing products last longer.
7. Surbuf pads can be cleaned easily by hand for on-the-go operations using a comb or soft brush.

• Surbuf pads eliminate swirl marks.
• MicroFingers? resist bending and matting to allow cooler, non-burning surface temperatures, which helps protect clear coat finishes.
• Slim profile easily conforms to different surface contours for maximum coverage and efficiency.
• Surbuf pads allow for a wide range of operating speeds up to 12,000 opm on ANY solid surface without snagging while reducing the risk of damage to pin striping, decals, and wood tear-out. It also minimizes friction, skipping, and chattering.
• Hook-and-loop fastening system makes changing pads quick and easy.
• Edge-to-edge loop fastening accepts various sizes of backing plates providing full hook-to-loop engagement for maximum holding strength and added peripheral edge stability.
• Low-pad absorption helps make cleaning and polishing products last longer.
• Surbuf pads can be cleaned easily by hand for on-the-go operations using a comb or soft brush.

Surbuf? R Series Automotive ApplicationsSurbuf’s R Series applicator and buffing pads with MicroFingers? technology are designed specifically for use on random orbit sanders/polishers and are so easy to use that with a little practice, anyone can get professional results the first time and every time – without working up a sweat!Apply a small amount of product to the center of the pad, then place the pad on the surface before turning on the machine. Surbuf pads require half as much product as other types of pads.Fine cut cleaners and polishes require that the product be worked for a period of time to achieve their purpose. Follow manufacturer’s recommendations for application.When applying wax, always use parallel strokes and overlap each stroke slightly. Do not go back over the areas since this will make the wax gum up and become difficult to remove.Always work one small area at a time. Allow the wax to set until almost completely dry. Then buff with a clean Surbuf pad to achieve depth and brilliance of shine.Always clean pads immediately after use. Hand wash with Greased Lightning?, Simple Green? or a dish soap and then allow to air dry. Place the clean, dry pads in a plastic bag or the original package to protect them for future use.

Surbuf? R Series Woodworking Applications

Surbuf’s R Series applicator and buffing pads with MicroFingers? technology are designed specifically for use on random orbit sanders/polishers and are so easy to use that with a little practice, anyone can get professional results the first time and every time – without working up a sweat!Before you begin, vacuum the pad to remove any remaining loose fibers. For staining, it is best to wash the pad before using. Press moisture out of the pad by squeezing, then pat dry with a towel. Pads can be used while damp.Apply stain first to the pad, then place the pad on the surface and turn on the machine. Use the slowest OPM. For best results use only light pressure to keep the MicroFingers? vertical.Apply stain to the center of the pad in very small amounts. Do not saturate the pad. This can be done using a syringe or squeeze bottle. Make sure the applicator is leak proof and has a small opening for flow control. (See our Staining Procedure How-To Article).Maintain a wet edge as you work, always working from where you last applied stain toward the unfinished area. Blend to a uniform consistency as you go.After all areas have been stained, go back over the entire surface with a buffing action. This will speed the drying process, smooth the surface so little or no additional sanding is necessary, and eliminate the need to wipe excess stain from the surface. You can keep going over the surface with additional coats to darken the look or you can wait tell it is dry before applying additional coats. Follow the manufacturer’s recommendations for drying time. If you will be applying additional coats of stain within a few hours, you can remove the pad and place it in a sealed bag to prevent it from drying between uses. Clean stain from the pad by wiping the MicroFingers? surface with a rag using mineral spirits, then wash with a dish soap, Greased Lightning? or Simple Green? and rinse thoroughly. Let pads air dry. Do not use a dryer!To apply wax, start with a new pad and place a small amount in the center of the pad. Place the pad on the surface before turning on the machine and move in slow parallel strokes. Apply more wax as needed to cover the surface lightly. A light coat of wax will produce a higher quality shine than a heavier coat. If the shine appears dull and has swirl marks, cut back on the amount of wax applied. Use a clean pad to buff the surface to a final shine. Follow the manufacturer’s recommendations for applying additional coats of wax. If the MicroFingers? become clogged with too much wax, lightly hold a comb or soft brush to the fibers while the machine is running to clean the pad. To clean wax or polish from the pad, follow the cleaning steps for stain (described above), but omit the use of mineral spirits.

Surbuf? R Series Marine ApplicationsSurbuf’s R Series applicator and buffing pads with MicroFingers? technology are designed specifically for use on random orbit sanders/polishers and are so easy to use that with a little practice, anyone can get professional results the first time and every time – without working up a sweat!Apply a small amount of product to the center of the pad, then place the pad on the surface before turning on the machine. Surbuf pads require half as much product as other types of pads.Fine cut cleaners and polishes require that the product be worked for a period of time to achieve their purpose. Follow manufacturer’s recommendations for application.When applying wax, always use parallel strokes and overlap each stroke slightly. Do not go back over the areas since this will make the wax gum up and become difficult to remove.Always work one small area at a time. Allow the wax to set until almost completely dry. Then buff with a clean Surbuf pad to achieve depth and brilliance of shine.Always clean pads immediately after use. Hand wash with Greased Lightning?, Simple Green? or a dish soap and then allow to air dry. Place the clean, dry pads in a plastic bag or the original package to protect them for future use.